Whole-Home Repiping in Austin & San Antonio

Stop Patching the Pipe That Keeps Failing

When leaks come one after another, the problem is the system, not the spot. Radiant replaces worn-out water lines through the whole house in Austin, San Antonio and Central Texas, with a written price, a clear schedule and as little time without water as we can manage.

Repiping

Some Pipe Is Not Worth Repairing Anymore

Three kinds of pipe in Central Texas homes reach a point where the next repair is money wasted. Galvanized steel, common in houses built before the 1960s, rusts shut from the inside until pressure drops and the water runs orange. Polybutylene, the gray plastic used in a lot of homes from the late 1970s into the mid-1990s, gets brittle and lets go at the fittings without warning. And copper that has spent decades under a slab in shifting clay, carrying very hard water, develops pinhole leaks that keep appearing in new places. Fix one, another shows up a few feet down the line.

A whole-home repipe replaces all of it with new PEX or copper in one planned job instead of a string of emergencies. Radiant maps the house first, routes the new lines through the attic and walls with as few openings as we can manage, and keeps water on for you at the end of each day. You get one price in writing before we start, backed by the Home Comfort Guarantee, and financing options if you would rather spread it out. Not sure the system is that far gone? Start with leak detection or a plumbing inspection, and we will tell you straight whether a repair still makes sense. If the leaking pipe is the line from the meter to the house, that is a water line replacement, a smaller job.

  • Planned, not improvised Every run is mapped before the first cut, so the openings are few and the water is off for hours, not days.
  • Honest about when to do it One leak in sound copper is a repair. The third leak in galvanized is a repipe. We will tell you which you have.
  • Licensed master plumbers M-42438 in Austin, M-45619 in San Antonio. Work done to Texas plumbing standards and inspected as required.
Radiant plumber with a tool bag beside a service van before a whole-home repipe

What to Watch For

Signs the Whole System Is Wearing Out

One of these is a repair. Several together, in an older home, is a conversation about repiping.

  • Leaks keep showing up in new places

    The second and third leak on the same system are the pipe telling you the rest is the same age and condition.

  • Rusty or brown water first thing in the morning

    Galvanized steel shedding rust from the inside. It clears after a minute because you flushed the pipe, not because it stopped.

  • Pressure that faded over years

    Scale and rust narrowing the inside of the pipe. Two fixtures at once and the shower goes to a trickle.

  • Gray plastic pipe at the water heater or under sinks

    Polybutylene, often stamped PB2110. It has a known failure history and many insurers ask about it.

  • More than one slab leak

    Copper under a moving slab does not fail once. A second slab leak is the point where rerouting everything overhead starts to win.

  • Green or white crust on copper joints

    Corrosion working through from the inside, often from decades of hard water. The joints you can see are a sample of the ones you cannot.

What a Repipe Includes

Every Supply Line, Meter to Fixture

A complete replacement of the pressurized water lines, not a partial job that leaves the worst pipe in the wall.

Family relaxing at home in a kitchen after a Radiant whole-home repipe
Whole-home repiping of every supply line, from the meter to each fixture.
  • New PEX or copper throughout Hot and cold lines to every fixture, replaced with the material that fits your house and budget. We explain the tradeoffs plainly.
  • Overhead routing away from the slab New lines through the attic and down the walls, so soil movement under the foundation stops being your plumbing problem.
  • New shutoff valves at every fixture Quarter-turn stops under sinks and toilets and at the water heater, so the next small repair does not mean shutting off the whole house.
  • Pressure reducing valve and main shutoff A new main valve you can actually turn and a PRV set correctly, which protects the new pipe from day one.
  • Water heater connections New supply lines, valves and, where needed, an expansion tank at the water heater so the system is done right end to end.
  • Drywall patching coordinated Access openings are kept small and their locations shown to you before we cut. We tell you upfront how the patching is handled.

How It Works

How a Repipe Goes, Start to Finish

A typical home takes a few days, and we plan the work so you have water at the end of each one.

  1. Walk the house and map it

    We check the existing pipe, count fixtures, look at the attic and walls and plan the routes. You get a written price and a schedule.

  2. Protect and open

    Floors and furniture covered, then the fewest access openings that let us run the new lines. You see where each one goes first.

  3. Run the new lines

    New pipe to every fixture, new valves, new connections at the water heater and main. Old lines are capped and abandoned in place.

  4. Test, inspect, finish

    The whole system pressure-tested and checked at every joint, any required inspection scheduled, and the patching handled as agreed.

Tired of the Next Leak?

Get a written repipe price and a straight answer if a repair would do instead.

What Our Customers Say

Don't just take our word for it — hear from our satisfied customers

J Jeff Fazio
Jeff Fazio 3 years ago
★★★★★
I had Radiant Plumbing replace my tankless water heater, damaged in the Feb. 2021 snowmageddon storm with a new unit. The process was smooth and professional from start to finish. The plumber, James, was extremely knowledgeable and thoroughly explained my options to me. The cost and time to perform the installation were just as estimated. When he was done, James explained how to maintain the system, what service would be needed and how to perform it, and answered all of my engineering geek questions. It was a thoroughly positive experience. I have used several different plumbers in Austin over the past 15 yrs, but my search is over - I will not hesitate to call Radiant next time and would recommend them unreservedly.

8/9/23 Update: I have subsequently used Radiant for a toilet repair, faucet installation (Danny), and drain work (Ezekiel) and they have continued to impress with knowledgeable, friendly plumbers and quality work.
C Cathy McClaugherty
Cathy McClaugherty 5 years ago
★★★★★
We called Radiant Plumbing after we noticed a water leak in our kitchen. We were in a time crunch and they were able to schedule us quickly, before we left for vacation. They sent their representative, Preston Nichols, and he was excellent to deal with! He was on time, skillful, friendly, and very professional. It turned out to be a problem with our dishwasher but Preston was quick to diagnose it and set our minds at ease. While he was here, we mentioned that our one year-old water heater needed to be flushed. Preston was quick to take care of that, as well, saving us time and money in the process. Radiant charged us almost half the price another plumber quoted us for that service! While Radiant Plumbing isn’t our usual plumber, they gained a new customer. We won’t hesitate to call Radiant again in the future based on our VERY positive experience with them.
S Stefano Rosellini
Stefano Rosellini 6 years ago
★★★★★
Had 3 different systems installed by them approx. 3 years ago for a total of approx $20k. I was quite happy with the install until the year later when they came for a maintenance call and started finding deficiencies in their own install. they wanted extra money to address those deficiencies. Now I am in the process of selling my home and an inspector has found a few items that need to be addressed and they will not even look at the report unless I schedule a $139.00 service call. Very poor customer service.. This company does not stand by their work and would not recommend.

I am revising my review of this business from 1 to 5 stars. After my original review I was contacted by the company's service manager and he made sure that I was taken care off. I had a team of 3 technicians coming to my house to double check the system and make the necessary adjustments. I was very satisfied by their attention to details and professionalism.

Maintenance Membership

Join the Care Club

Home maintenance for $9.99 a month.

Care Club members get two HVAC tune-ups and a plumbing safety inspection every year, priority scheduling, no dispatch fees — ever — and 5% off every repair.

  • Priority scheduling
  • Seasonal HVAC tune-ups
  • Annual safety inspection
  • Exclusive member discounts
  • Free dispatch on repairs
  • No long-term contracts

Repiping Questions

How do I know whether my house needs a repipe or just a repair?

Ask three questions. What is the pipe made of? Galvanized steel and polybutylene are both at the end of their useful lives in any home that still has them, and the honest answer is usually to replace them before the next failure rather than after. How many times has it leaked? A first leak in copper is a repair. A third leak in three years is a pattern, and each patch is buying less time than the last. What is the water doing? Rust color, falling pressure and crusted joints are all signs of pipe deteriorating everywhere, not one bad spot. If you are unsure, have us look. We will give you a repair price and a repipe price and tell you which we would choose in your house.

PEX or copper: which should I choose for a repipe?

Both are good, and we install both. PEX is flexible plastic tubing that snakes through attics and walls with fewer fittings and fewer openings, tolerates our hard water without corroding, handles a freeze better than rigid pipe, and costs less. It is the most common choice for repipes here for those reasons. Copper is rigid, long-proven and preferred by some homeowners for resale or for exposed runs; it costs more, needs more openings to install, and is the material that hard water and soil movement have been wearing out under local slabs. For most Austin and San Antonio homes we recommend PEX with copper stubs where pipe is exposed. We are happy to price both.

How long will my water be off during a repipe?

Less than most people expect. A typical single-family home takes a few days of work, but the water is not off the whole time. We build the new system alongside the old one, and the old one stays live until the new lines are ready to connect. The actual switchover, when we tie the new pipe into the main and the water heater, is usually a matter of hours, and we plan it so you have water at the end of the day. Larger homes, two-story layouts and houses with finished ceilings over every run take longer, and we tell you the realistic schedule in the written estimate before you commit.

Does a repipe include the drain lines too?

Usually not, and the two are separate jobs for good reasons. A repipe replaces the pressurized supply lines that bring water to your fixtures. Drain and sewer lines work by gravity, run under the slab and out to the street, and fail differently, from root intrusion, bellies and cracked cast iron rather than pressure and corrosion. They are inspected with a camera and repaired or replaced on their own, often with trenchless methods. If you have problems on both sides, we can look at both on the same visit and give you separate prices, so you can decide what to do now and what can wait. See our drains and sewers pages for how that side of the house is handled.

*Offers cannot be combined with other promotions or applied to dispatch fees. No cash value. Must present offer at time of service. Call for details.
(833) 656-4056 Book Now
×