Cities We Serve
Austin Area:
San Antonio Area:
Not seeing your area? Give us a call at (833) 656-4056
HVAC Air Filters
A clogged filter is behind a surprising number of the summer breakdowns we see. The blower pulls against a wall of dust, airflow across the coil drops, the coil freezes into a block of ice, and the call comes in as “my AC quit.” The fix is a new filter and a few hours of thawing, but by then the blower motor has spent weeks running hot. The wrong filter does similar damage more slowly: a dense, high-rated panel jammed into a slot meant for a basic one restricts airflow every day it is in there.
So the questions are simple but they matter. What size does your return actually take, and does it seal? What rating can your system handle without losing airflow? How fast does your house load a filter, given the dogs, the pollen and the dusty road out front? Our technicians answer those on a visit, and they check the filter at every Care Club tune-up so the answer stays current.
When a one-inch filter cannot do what your house needs, the upgrade is a whole-house media cabinet, and when the problem is what the filter cannot catch, a purifier. We will tell you which, and just as readily tell you that the filter you have is fine.
Filter Trouble
Check the filter before you call about any of these. It is the first thing our technician will look at anyway.
Restricted airflow is the usual cause, and a packed filter is the usual restriction. Turn the cooling off and let it thaw.
If every register is weak rather than one or two, the problem is upstream of the ducts: the filter or the blower.
Less air across the coil means less cooling per minute. The system runs longer to do the same job.
Air being pulled hard through a loaded filter or around a badly fitting one makes noise.
A filter that does not seal in its slot is a filter the dust goes around. Fit matters as much as rating.
Common in a house you just bought. Some systems have it at the return grille, some at the air handler, some both.
What We Do
The store sells filters. We know which one your system wants.
How It Works
It is a short visit, and it usually saves a longer one later.
We locate every filter in the system, check the fit and see how it has been loading.
Static pressure with the filter in tells us whether the current rating is costing you airflow.
Size, rating and interval, written down. If an upgrade makes sense, you get a price and no pressure.
Care Club tune-ups include the filter check, so the schedule does not depend on your memory.
Save on the work your home needs most.
Book a visit in Austin or San Antonio and get a straight answer, in writing.
Don't just take our word for it — hear from our satisfied customers
Maintenance Membership
Home maintenance for $9.99 a month.
Care Club members get two HVAC tune-ups and a plumbing safety inspection every year, priority scheduling, no dispatch fees — ever — and 5% off every repair.
MERV is a scale that describes how small a particle a filter can capture; a higher number catches finer particles. The catch is that finer media also resists airflow more, and a one-inch slot does not give a high-MERV filter enough surface area to breathe. Push the rating too high for your system and the blower struggles, the coil can freeze and the bill goes up. For most Central Texas homes with a standard one-inch slot, a moderate pleated filter is the sweet spot. If you want higher capture for pollen season, the answer is usually a deeper media filter, not a denser thin one.
More often than the box says, in most cases. Our cooling season runs from April into October, so the blower moves far more air through the filter in a year than it would up north. Add a cedar season that dumps pollen from December through February, pets, and the dust from limestone and caliche soil, and a one-inch filter in a busy household can be done in a month. Check it monthly; if you cannot see light through it easily, change it. A deep media cartridge stretches that to several months. Care Club members get it checked at both annual tune-ups.
The arrow points in the direction the air moves, which is toward the air handler and away from the room. At a return grille in a wall or ceiling, the arrow points into the wall, toward the duct. At the air handler, it points toward the blower. A filter installed backward still catches some dust but loads unevenly, and the frame side can collapse into the pleats under airflow. If you are ever unsure, run the system and feel which side the air is coming from; the arrow points away from your hand. Our technicians label the slot on the first visit so it is never a question again.
They can be, with two cautions. First, they have to be genuinely dry before going back in, or you have put a damp sponge in front of a coil that already fights humidity. Second, many washable filters capture less fine dust than a decent pleated disposable, so they save money without necessarily improving the air. If the goal is fewer trips to the store, a media cabinet that lasts months does that with better capture. If the goal is cleaner air, we would rather look at your return and static pressure and recommend from there than send you to a particular product.
Often no, and running two in series can restrict airflow enough to cause trouble. It is common in a house that has been through a few owners: one filter at the return grille in the hallway and another at the air handler in the attic or closet, each added by someone who did not know about the other. The system only needs one properly fitted filter. Our technician will tell you which location seals better and is easier for you to reach, remove the other, and make sure the empty slot is closed so air does not bypass the filter that stays.