Cities We Serve
Austin Area:
San Antonio Area:
Not seeing your area? Give us a call at (833) 656-4056
Ductless Mini-Splits
A ductless mini-split is a small outdoor unit connected to one or more wall-mounted indoor units by a refrigerant line that runs through a hole about three inches wide. No ducts, no attic work, no cutting into ceilings. Each indoor head has its own thermostat, so the garage workshop can sit at 78 while the bedroom above it holds 70. Nearly all of them are heat pumps, so the same unit that cools the room in August warms it in January.
In Central Texas they solve specific problems. The garage apartment or casita that was never tied into the main system. The addition or converted porch that the old ductwork could not stretch to. The upstairs bonus room over the garage that runs eight degrees hotter than the rest of the house all summer. The 1960s Austin or San Antonio home with no ductwork at all, where a few heads can replace a collection of window units. And older houses where the attic ducts leak so badly that a ductless system for the main living space is the cleaner fix.
Radiant installs and services mini-splits across both markets. We size each head from the room, run the line sets cleanly, mount the outdoor unit where it can breathe, and vacuum and charge the system by measurement. The quote is in writing and honored for 72 hours, financing is available, and the work is backed by the Home Comfort Guarantee. If a conventional ducted system would serve you better, we will tell you.
Is It Right for You
If one of these sounds like your house, ductless is probably the answer. If none do, a conventional system may still be the better fit.
Tying a garage into the main system is a bad idea for air quality and load. A single head keeps it usable in July without touching the house.
Common across Austin and San Antonio backyards. A mini-split gives the unit its own system and its own bill.
The bonus room over the garage, the west-facing bedroom, the sunroom. A dedicated head fixes it without re-ducting the house.
The existing system was sized for the old footprint. Adding load to it makes the whole house worse; a mini-split adds capacity where the space is.
Older homes running on window units. A multi-zone system replaces them with something quieter, safer and far more efficient.
One person sleeps cold, the rest of the house does not. A single head in the primary bedroom ends the thermostat argument.
What We Do
Single-zone and multi-zone systems, installed and kept running.
How It Works
A single-zone install is usually finished in a day. Multi-zone jobs run a day or two depending on line-set routing.
Room size, sun exposure, insulation and how the room is used. We pick head locations that cover the room and line-set routes that stay out of sight.
Equipment, labor, electrical and any wall or pad work, itemized. Honored for 72 hours, with a monthly financing figure if you want it.
Heads mounted, the wall penetration sealed, line sets run and covered, the outdoor unit set, then the system pressure-tested, evacuated and charged.
We show you the remote, the modes and how to pull and rinse the filters, then run every head in both heating and cooling before we leave.
Save on the work your home needs most.
A written mini-split quote, honored for 72 hours, with financing on approved credit.
Don't just take our word for it — hear from our satisfied customers
Maintenance Membership
Home maintenance for $9.99 a month.
Care Club members get two HVAC tune-ups and a plumbing safety inspection every year, priority scheduling, no dispatch fees — ever — and 5% off every repair.
It depends on the outdoor unit. Single-zone systems run one head. Multi-zone outdoor units commonly support two to five indoor heads, and some larger models go higher. The outdoor unit has to be sized for the combined load of every room it serves, and the heads have to be sized for their individual rooms, which is a different calculation than a central system. Putting an oversized head in a small bedroom is a common mistake: it cools the air quickly, shuts off before it dehumidifies, and leaves the room clammy. We size each head from the room and the outdoor unit from the total, and we show you the numbers.
Almost all of them do. The great majority of ductless systems sold today are heat pumps, which means the same outdoor unit reverses in winter and pulls heat from the outdoor air into the room. In Central Texas, where a hard freeze is the exception rather than the rule, that is plenty of heating for a garage apartment, an addition or a bedroom. Unlike a central heat pump, most mini-splits have no electric backup strips, so on the coldest few nights of the year the output drops somewhat. For the rooms mini-splits are usually installed in, that is rarely a problem, and we will tell you if your situation is the exception.
One small one per indoor head, about three inches across, usually directly behind or beside the unit where it is hidden. The refrigerant lines, the condensate drain and the control wiring all pass through that single opening, which is sealed and weatherproofed. On the outside, the line set runs to the outdoor unit inside a paintable cover so it looks tidy against the siding or stone. That is the entire extent of the construction. No ductwork, no soffits, no attic access and no drywall repair, which is most of why a mini-split install is measured in hours rather than days.
Lift the front cover of the indoor head, slide out the mesh filters, and rinse them under lukewarm water or vacuum them gently. Let them dry fully before sliding them back in. Do this about once a month during heavy use and more often during cedar season or if you have pets. It takes two minutes and it is the single most useful thing you can do for the system: a clogged filter restricts airflow, makes the head noisy and can freeze the coil. What you cannot reach with a rinse is the coil and the blower wheel behind the filters, which pick up a film of dust and growth in our humidity. That is a job for a tune-up, and it is covered under Care Club.
Generally, yes, by a wide margin. A ductless system uses an inverter-driven compressor that ramps its speed up and down to match the load instead of switching fully on and off, and its coils are far larger relative to the room than a window unit’s. It is also much quieter, does not block a window, does not leave a gap for hot air and insects, and can be locked from the outside. For a house in Austin or San Antonio that has been running three or four window units through the summer, replacing them with a multi-zone mini-split usually shows up on the electric bill in the first month. We can walk you through the estimated operating cost on your quote.