Cities We Serve
Nearby Cities:
Not seeing your area? Give us a call at (512) 265-6994
Austin Water Heater Replacement
The unit itself is the easy part. What makes a replacement go well in an Austin home is planning around the location the builder chose. In the slab suburbs, Round Rock, Pflugerville, Cedar Park, Leander, Hutto and Kyle, that usually means an attic: a tank has to come down a pull-down ladder and a new one has to go up, the pan and drain line need to be right, and the vent and gas or electrical connections have to meet current code even if the old ones never did. In the older central neighborhoods, Hyde Park, Crestview and Tarrytown, the heater is often in a garage or a closet, which is simpler to reach but may have venting, clearance or seismic-strap issues that a modern install has to correct.
Then there is the water. Austin’s hard water is why most tanks here do not reach the age their labels promise, and it is the first thing we talk about when sizing a replacement, because the same water will work on the new unit. A softener, a tankless unit that can be descaled, or simply a plan to flush annually all change how long the next heater lasts. Our water heater installation page walks through the general process; below is how we approach it in Austin homes.
Time to Replace?
Any one of these on an older unit is worth a conversation. Two or more usually means the decision has been made for you.
If it is the tank and not a fitting, the steel has rusted through. There is no repair for that, and in an attic it is urgent.
A lot of Round Rock, Kyle and Cedar Park homes are still on the builder’s original tank. Austin water rarely lets one last that long without trouble.
The anode rod is gone and the tank lining is corroding. Once it starts, a leak follows.
An element this year and a gas valve last year on a ten-year-old tank means the money is going into a unit that is on its way out.
A 40-gallon tank sized for a couple does not keep up with teenagers and a garden tub. Replacement is the time to fix capacity.
A new primary bath or a garage apartment in a central Austin lot changes the demand, and often the best location for the heater.
Replacement Options
Matched to the fuel, the space and the water you have, with the trade-offs explained in plain terms.
How Replacement Works
What happens between the estimate and the first hot shower.
Location, fuel, venting, water pressure, household size and the condition of the pan and connections all go into the recommendation.
Usually two or three: a like-for-like tank, an upgrade, and a tankless if it fits. Each with a total price honored for 72 hours, no hidden fees.
Old unit out and hauled away, new one set with a proper pan, drain, expansion tank, straps and venting, under a permit where the city requires one.
We fill it, check for leaks, verify combustion and temperature, and show you the shutoff and the settings before we leave.
Save on the work your home needs most.
Written options, honest sizing and financing with no interest and no payments for six months, subject to credit approval.
Don't just take our word for it — hear from our satisfied customers
Maintenance Membership
Home maintenance for $9.99 a month.
Care Club members get two HVAC tune-ups and a plumbing safety inspection every year, priority scheduling, no dispatch fees — ever — and 5% off every repair.
Often, yes. The candidates are a garage wall, a utility closet, or an exterior wall for a tankless unit. What decides it is whether we can run the water, gas or electrical and venting to the new spot within reason, and whether the drain and pressure relief can be handled correctly there. In many Round Rock, Cedar Park and Pflugerville two-story homes, converting to a wall-hung tankless on the garage side is the cleanest way out of the attic. In a single-story slab home with the garage on the far side, the attic may still be the practical location, in which case we make sure the pan, drain line and shutoff are done right. We will tell you which applies to your house and price both.
Sometimes, but not as often as people assume. If the current tank is full of sediment, half of its rated capacity may already be gone, and a fresh tank of the same size will feel like an upgrade. If the household has genuinely grown, a larger tank or a faster-recovering gas unit makes sense. And if the problem is several showers back to back, a tankless unit sized for the flow may serve better than any tank. Attic space and the pull-down ladder also limit how big a tank can physically go up. We size from your bathrooms, fixtures and routine rather than defaulting to the next size up.
A permit, yes: the City of Austin and the surrounding cities treat water heater replacement as permitted plumbing work, and it may be inspected afterward. We handle that as part of the job. An expansion tank is required by code in most cases where the home has a pressure-reducing valve or a backflow preventer, which describes a large share of Austin-area homes, and it is a good idea regardless because it keeps the relief valve from dripping and takes stress off the new tank. Seismic straps, a proper drain pan for an attic install, and correct venting are the other things an inspector looks for and that we build in from the start.
Radiant offers financing through Service Finance Company, LLC, subject to credit approval. The headline option is no interest and no payments for six months; after that it converts to 12.95% APR for 120 months. There is also a straight 12.95% APR for 180 months. The application is quick and can be done during the estimate, so a failed tank does not have to mean choosing the cheapest unit that fits. Full terms are on our financing page, and the written quote spells out the total before you sign anything.