Goodman HVAC System Replacement in Leander, TX

A new Goodman HVAC condenser unit installed outside a home on a concrete slab.

When a Leander homeowner needed a reliable HVAC upgrade, they called Radiant Plumbing & Air Conditioning. Our team installed a full Goodman gas furnace and central AC system, added an ecobee smart thermostat, and cleaned up the airflow path for better temperature control throughout the home.

Job Overview

  • Location: Leander, TX
  • Client Type: Residential homeowner
  • Scope: Full HVAC system replacement—new outdoor condenser on a new pad, upflow furnace in a hallway closet, coil, filter base, plenum transition, and smart thermostat installation
  • Equipment Installed: Goodman GSXH5 air conditioner, GM9S80 gas furnace (60k BTU), CAPTA cased coil, and an ecobee smart thermostat
  • Why It Mattered: The existing system showed age and efficiency loss. The upgrade brings steadier temps, safer operation, and a modern control that helps the homeowner manage energy use.

What We Found

During our onsite review, the original system was aging and underserving peak demand. The indoor unit’s closet install had a tight return path and dated connections. Outdoor, the placement needed a fresh, level pad and proper clearances to support long-term performance.

The Solution

Radiant’s installation team set a new, level equipment pad and placed the Goodman GSXH5 condenser with correct clearances. Indoors, we installed a GM9S80 upflow furnace with a matched CAPTA coil, built a new filter base, and fabricated a clean plenum transition to improve airflow. We updated refrigerant, drain, low-voltage, and gas connections, commissioned the system, and paired an ecobee smart thermostat so the homeowner can monitor and adjust settings from anywhere. Final steps included closing the City of Leander permit and registering equipment for warranty.

Photo Highlights

A new Goodman HVAC condenser installed properly outside a home

A Goodman furnace blower inside an HVAC closet in a home

Gas line connection from main to furnace

Furnace ventilation ducting from the blower out of the home

The Results

After startup and testing, the home now holds target temperatures more evenly from room to room. The ecobee controller gives the homeowner simple scheduling and insight into run times. With a clean install and registered warranty, maintenance will be straightforward for years to come.

Trusted HVAC Experts in Greater Austin

Since 1999, Radiant Plumbing & Air Conditioning has helped Leander homeowners replace aging AC systems with dependable, code-compliant installs. If you’re planning a change-out or looking to stabilize temperatures at home, our licensed team is ready to help. Ask about our Radiant Care Club for priority service and seasonal tune-ups.

Ready for an upgrade? Schedule online and discover why your neighbors say, “Just Call Radiant.”

Frequently Asked Questions

Replacing an AC condenser is a complex job that should always be handled by a licensed HVAC professional. The process involves much more than just swapping out a part — it requires the right tools, technical expertise, and knowledge of refrigerant handling to ensure your system runs safely and efficiently.

Here’s what a professional AC condenser replacement typically involves:

  • Shutting off power to the system for safety

  • Recovering refrigerant following EPA guidelines

  • Disconnecting electrical components and refrigerant lines

  • Removing the old condenser unit

  • Installing and properly positioning the new condenser

  • Reconnecting electrical and refrigerant lines

  • Pulling a vacuum to remove moisture and air

  • Recharging the system with the correct refrigerant

  • Testing system performance and ensuring everything works smoothly

At Radiant Plumbing & Air Conditioning, we’ve been replacing AC condensers for Texas homeowners since 1999. Our technicians handle every step with precision and care, so you can feel confident your system is installed correctly, backed by warranties, and built to last. We also check for related issues like ductwork problems or thermostat compatibility to make sure your home stays cool and efficient.

Strange noises, poor airflow, and inconsistent temperatures are all red flags. Our experts can diagnose the issue and help you decide whether a quick repair or full replacement makes the most sense. Don’t wait—schedule a professional inspection today.

Absolutely. Our licensed pros can safely remove your old unit, wire in your new smart thermostat, and make sure it talks seamlessly with your HVAC system. We’ll even help you connect it to your Wi-Fi and show you how to use it before we leave.

Read more blogs...

Call or Schedule Your Service Online!

Need Help? Get the Best in Home Services.